BEKA HP-Series

The hydraulic driven BEKA HP-Series pumps are particularly suitable for use as a progressive lubrication systems for attachments such as plowing, harrowing, drilling or sowing machines, balers, front loaders and other hydraulic equipment with NLGI-1 and -2 grease.
beka hp series

General

The pumps in the HP-Series are robust and have a compact design and require ample space to install. Within the range there are several pump types available, like the HPM, HPG and HPH pumps.

The HPM-2 pump should be connected to an progressive divider block by a main line. Delivery rate of the pump can be set between 0.2 and 2 cm3 per stroke.

Both HPM-pumps are suitable to use with 400 gram grease cartridges, where the HPM pump has a sleeve where the cartridge is entered into. The HPM-2S works with standard grease cartridges type S, which are screwed directly into the pump housing.

The HPG-2 is already equipped with a MX-2 type progressive distributor directly on the pump. This pump also has a separate lubrication outlet in case a lubrication point needs a higher dosage by connecting metering to the pump’s separate lubrication outlet instead of the progressive divider. With both pumps the number of distributor elements and the metering volume can be adjusted to the application.

Next to the type S cartridge, the HPG-2 can also be used with other cartridge types by using an adapter. The use of cartridges enables quick and clean refilling of the system without the use of additional tools.

We got your attention? Let's get in contact

Technical Data HPM HPG-2
Function principle Hydraulic piston pump Hydraulic piston pump
Outlets 1 Max. 20 or 1 at pump housing
Delivery volume 0.2 - 2 cm3/stroke 0.27 cm3/stroke
Lubricant NLGI-2 without solids NLGI-1 and NLGI-2 multi-purpose grease
Operation temperature 0 °C up to +50 °C (-4 up to 158 °F) -10 up to +50 °C (14 up to 122 °F)
Operating pressure Max. 220 bar (3190 psi) Max. 220 bar (3190 psi
Reservoir 400 gr cartridges, HPM-2S cartridge type S Depending on cartridge sleeve: Type S, F, J, or L
Supply voltage Hydraulic breaker circuit, 130 - 250 bar (1885 - 3625 psi) Hydraulic breaker circuit, 70 - 400 bar (1015 - 5801 psi)

Downloads

Do you need detailed information, technical specifications or operating instructions for your Groeneveld-BEKA product? Look no further. On our Manuals & Downloads page, you will find all the information needed.

Further Products

Show all